| |
K7EK > HERMES 12.10.26 22:03l 65 Lines 1721 Bytes #50 (0) @ WW
BID : 51763_K7EK
Read: GAST
Subj: Mercury v1.9.18 is here, with a WARNING
Path: DB0FFL<OE2XZR<OK1TOR<OK0NAG<F3KT<F1UBL<K7EK
Sent: 261012/1748Z 51763@K7EK.#NOKY.KY.USA.NOAM BPQ6.0.25
"
Mercury 1.9.18 Latest @github-actions github-actions released this 49 minutes ago
v1.9.18 9df34e9
Warning
Mercury 1.9.18 does not talk to Mercury 1.9.17 or any older version over
the air, in either direction. A 1.9.18 station and a 1.9.x station never connect.
Upgrade every station of a network together (on HERMES, the gateway and
all its remote stations in the same window).
Read Upgrading to 1.9.18 before upgrading. It says what an operator sees with
mixed versions, how to upgrade, and what was tested before this release.
"
K7EK wil upgrade to Mercury v1.9.18 later this afternoon, giving this bulletin
time to make it through BBS forwarding channels.
---
Get Mercury Modem here:
https://github.com/Rhizomatica/mercury/releases
-
K7EK runs Mercury as well as VARA-HF and Pactor 1/2/3/4 24/7 on the following
time schedule. Everyone is welcome:
0000-1259z: 3.587 mhz
1300-1859z: 7.1009 mhz
1900-2359z: 10.1430 mhz
This schedule may change at any time in accordance with operational requirements
and seasonal propagation patterns. Check this schedule at https://www.qrz.com/db/K7EK
often to insure that you have the most up to date information.
All frequencies are USB/dial. For Center frequencies (CF), add 1.5 kilohertz.
BPQ32 BBS is K7EK.
BPQ32 Netrom Node is K7EK-7.
Winlink RMS is K7EK-10.
BPQ32 Worldwide Chat is K7EK-11.
Make sure you choose the correct SSID for what it is you are trying to connect. Some
have connected to the BPQ32 BBS, K7EK, when they thought they were connecting to
the Winlink RMS. Their messages stayed on the BBS and did not make it to Winlink
without manual system operator intervention.
Best regards,
Gary, K7EK
Radcliff, KY (EM77at)
Lese vorherige Mail | Lese naechste Mail
| |
