| |
PE1RRR > BPQ 07.02.20 07:44l 64 Lines 2297 Bytes #999 (0) @ WW
BID : 4498_PE1RRR
Read: GAST
Subj: Anomailes in 6.0.19.1
Path: DB0FFL<OE2XZR<OE1XAB<HG8LXL<CX2SA<OK2PEN<N3HYM<GB7CIP<PE1RRR
Sent: 200207/0531Z 4498@PE1RRR.#NBW.NLD.EURO LinBPQ6.0.19
HI folks,
I've been seeing this not only from first hand experience but also
seen in traffic passing through the node there between other BBSes.
After forwarding is complete, in some situations the BBSes remain
connected and fall into a loop of exchanging errors which trigger
more errors.
To show you what I mean, here's a snippet from my monitor log to
show you what I mean. Please ignore the extranous lines but for
the ones between K6EQ and PE1RRR.
-----
PE1RRR-3 to K6EQ ttl 20 cct=02A9 <INFO S2 R4>:
*** Protocol Error - Line should start with 'F'
18:26:04R K6EQ>PE1RRR-7 Port=11 <I C S0 R6> NET/ROM
K6EQ to PE1RRR-3 ttl 25 cct=123C <INFO S4 R2>B:
Invalid Command
de K6EQ>
18:26:04R K6EQ>PE1RRR-7 Port=11 <I C S1 R6> NET/ROM
K6EQ to PE1RRR-3 ttl 25 cct=123C <INFO S5 R2>B:
Invalid Command
de K6EQ>
18:26:28T PE1RRR-7>K6EQ Port=11 <I C P S7 R3> NET/ROM
PE1RRR-3 to K6EQ ttl 20 cct=04E1 <INFO S2 R4>:
*** Protocol Error - Line should start with 'F'
18:26:29R K6EQ>PE1RRR-7 Port=11 <I C S3 R7> NET/ROM
K6EQ to PE1RRR-3 ttl 25 cct=10A0 <INFO S4 R2>:
Invalid Command
de K6EQ>
18:26:29R K6EQ>PE1RRR-7 Port=11 <I C P S4 R7> NET/ROM
K6EQ to PE1RRR-3 ttl 25 cct=10A0 <INFO S5 R2>:
Invalid Command
de K6EQ>
19:18:03R LU9DCE-4>PE1RRR-7 Port=11 <I C P S6 R6> NET/ROM
OK2PEN-1 to GB7CIP ttl 14 cct=2776 <INFO S1 R1>:
*** Protocol error: Line starting with a letter which is not "F" or "*".
I've included one of the ones i managed to catch from OK2PEN and GB7CIP.
But it is slightly different so may be unrelated.
The status on the node circuit shows that the node has been instrcuted to
disconnect after the fwd, but looking at the status the node appears
to be hanging onto the circuit until it times out instead of a clean
disconnect.
(Closing) Circuit(SRDG:K6EQ PE1RRR-3)
(Closing) Circuit(SRDG:K6EQ PE1RRR-3)
(Closing) Circuit(SRDG:K6EQ PE1RRR-3)
---
I am on the chat with G8BPQ quite frequently but unfrotunately I don't
have a mail route to his system so this is the next best thing, plus
if you have seen similar behaviour it would be nice to collect the
info to maybe get a clearer picture of what is going on, whether it
be a bug or something else.
73's
Red @ PE1RRR
Lese vorherige Mail | Lese naechste Mail
| |
